PENGARUH VARIASI UKURAN SPROCKET BELAKANG TERHADAP DAYA DAN TORSI PADA SEPEDA MOTOR YAMAHA VIXION TAHUN 2015

  • Yoyo Saputro Universitas Muhammadiyah Pekajangan
  • Imam Prasetyo Universitas Muhammadiyah Pekajangan
  • Muhammad Thomi Nadhief Universitas Muhammadiyah Pekajangan
Keywords: sprockets, power, torque

Abstract

Motorcycles are equipped with a power transfer system that is able to bridge the engine output (engine power and torque) with the demands of road conditions, the sprocket is the last part of the power transfer system, because the sprocket is the part that transmits the engine power to the rear wheels through the chain. Previous researchers changed the size of the sprocket with a sprocket eye larger or 2 points smaller than the standard sprocket, while in this study replaced the rear sprocket with a large number of eyes and 4 points smaller than the standard sprocket. The purpose of this study was to determine the effect of variations in rear sprocket size on power and torque on the 2015 Vixion motor. This study used the data collection method from the daynote test using a dynamometer. The test results are the effect of variations in sprocket sizes 43T, 39T, and 47T resulting in an increase in power and the most optimal torque on the sprocket size 47T with a maximum power data of 16.1 HP, and torque data obtained with sprocket size 47T produces a maximum torque of 14.42 Nm. due to the large number of sprockets and the shorter distance between the front and rear sprockets.

Downloads

Download data is not yet available.

References

B. Daswin, T. Stenly, and R. Michael, “Optimasi Diameter Poros Terhadap Variasi Diameter Sprocket Pada Roda Belakang Sepeda motor,†J. Online Poros Tek. Mesin Univ. Sam Ratulangi, vol. 3.2014.

J. W. Jalius, Teknik Sepeda Motor Jilid 3, vol. 91, no. 5. 2012.

J. Lianno, “Perbandingan Penggunaan Sprocket Belakang Ukuran 35 Dengan Ukuran 38 Terhadap Konsumsi Bahan Bakar Pada Sepeda Motor Honda Karisma 125 CC,†Komodo J. Pendidik. Tek. Mesin, vol. 1, pp. 96–102, 2017.

D. Alexandra, “Pengaruh Penggantian Variasi Rasio Final drive Terhadap Daya Dan Torsi Pada Sepeda Motor Yamaha Jupiter.,†Fak. Tek. Univ. Negeri Malang, 2015.

M. E. Pristanto, “Analisis Pengaruh Variasi Rasio Final Drive Terhadap Daya Dan Torsi Pada Sepeda Motor Yamaha Vixion 2007,†Univ. Nusant. PGRI Kediri, pp. 1–11, 2016.

P. A. Stevansa, “Pengaruh Penggunaan Camshaft Standard dan Camshaft Racing Terhadap Unjuk Kerja Motor Bensin Empat Langkah,†Tugas Akhir, no. September, pp. 1–18, 2014.

A. J. Nathan and A. Scobell, “Motor Bakar,†academia.com, 2012.

F. Wijayanti and D. Irwan, “Analisis Pengaruh Bentuk Permukaan Piston Terhadap Kinerja Motor Bensin,†J. Ilm. Tek. Mesin Unisma “45†Bekasi, vol. 2, no. 1, p. 98156, 2014.

U. I. 45 Bekasi, “Analisis Keausan Sproket pada roda belakang Sepeda Motor Vega ZR,†Univ. Islam 45 Bekasi, 2017.

Nazaruddin and A. Dewangga, “Pengujian Dan Pembuatan Buku Petunjuk Operasi Chassis Dinamometer,†vol. 14, no. December, pp. 8–12, 2012, doi: 10.14710/rotasi.14.3.8-12.

Published
2021-06-30
How to Cite
[1]
Y. Saputro, I. Prasetyo, and M. T. Nadhief, “PENGARUH VARIASI UKURAN SPROCKET BELAKANG TERHADAP DAYA DAN TORSI PADA SEPEDA MOTOR YAMAHA VIXION TAHUN 2015”, SJMEkinematika, vol. 6, no. 1, pp. 11-20, Jun. 2021.