PERANCANGAN PROTOTYPE ALAT PENGURANG KADAR AIR PADA MADU KAPASITAS 5 LITER

  • Achmad Kusairi Samlawi Univesitas Lambung Mangkurat
  • Wahyu Slamet Pamungkas Universitas Lambung Mangkurat
Keywords: Design, Prototype, Air Reducer in Honey

Abstract

The quality of Honey must meet the requirements set by the Indonesian National Standard (SNI) in 2004. In the standard set, the enzyme diastase function is at least 3 DN, hydroxymethylfurfural (HMF) maximum 50 mg / kg, maximum air content is 22% b / b, sugar reducing at least 65% b / b,asucrose maximum 5% b / b, acidity maximum 50 milliecivalents / kg, solids not up to maximum 0.50% b / b, maximumAash content 0.50% b / b (BSN), 2004) To meetAthese standards designedAa tool that willAreduce the air content in honey without damaging it as it is vaccinated at -70 -70 bar with temperatures below 40 ° C. With the results of the balance shows: (1) electric motor with power ¼ HP with 1400 rpm rotation. (2) V-belt transmission with large outside pulley dimensions = 231.3 mm, small outer plley = 104 mm. Using a v-belt with no. 44 in / 1118 mm. Horizontal shaft with dimensions of large pulley shaft diameter = 18 mm and small pulley shaft diameter = 15 mm. (3) Using a gearbox damper with a ratio of 1:40. (4) Stirrer shaft with 304 grade stainless steel material with a length of 975 mm and a shaft diameter of 40 mm. (5) Stirrer impeller with six blade impeller type with dimensions of diameter 1667, mm and thickness of 3 mm. (6) Vessels with cylindrical types and having a thickness of 2.5 mm, a diameter of 500 mm and a length of 500 mm. With an ellipsoid head type with dimensions of 520 mm in diameter, 125 mm in height and 2.5 mm in thickness. (7) Frame with a profile of mild steel profile dimension dimensions of 40 mm x 40 mm x 2.5 mm.

Downloads

Download data is not yet available.

References

DAFTAR PUSTAKA

Adi Santoso Pribadi dan Rizal Bahrul Chamidi (2015), Mahasiswa Program Studi Diploma III Teknik Mesin Produksi. Institut Teknologi Sepuluh November, Surabaya. ‘Rancang Bangun Mesin Pengaduk Adonan Donat’.

Devyana Dyah Wulandari (2017). Mahasiswa Fakultas Kesehatan. Universitas Nahdlatul Ulama, Surabaya. ‘Kualitas Madu (Keasaman, Kadar Air dan Kadar Gula Pereduksi) Berdasarkan Perbedaan Suhu Penyimpanan.

Edwin Yunanto (2015). Mahasiswa Teknik Mesin. Universitas Negeri Yogyakarta, Yogyakarta. ‘Perancangan Pengkristal Gula Jawa’

Eugene F. Megyesy, Pressure Vessel Handbook. : Oklahoma, Pressure Vessel Publishing.INC : 2001.

Imam Al Hakim, dkk (2016). Mahasiswa Jurusan Keteknikan Pertanian, USU, Medan. ‘Rancang Bangun Alat Pengaduk Sabun Cair Bagan Baku Minyak Jelantah’.

K. Ratnayani, N.M.A Dwi Adhi S, dkk (2008). Mahasiswa Fakultas Matematika dan Ilmu Pengetahuan Alam, Universitas Udayana. Bukit Jimbaran, ‘Penentuan Kadar Glukosa Dan Fruktosa Pada Madu Randu dan Madu Kelengkeng Dengan Metode Kromatografi Cair Kinerja Tinggi’.

Mz Arif (2017). Mahasiswa Fakultas Kedokteran. Universitas Lampung. Lampung. ‘Pengaruh Madu Terhadap Luka Bakar’.

McCabe L. Warren, Julia C.Smith and Peter Harriot, Unit Operations Of Chemical Engineering.: New York, Librari of congress cataloging : 1993.

Nuzulia Khoiriah, dkk. (2016). Mahasiswa Teknik Mesin. UNISSULA, Semarang. “Perancangan Alat Pemeras Madu dengan Mempertimbangkan Faktor Ergonomi dan Waktu Proses Pemerasanâ€.

Neng Sri Novi, dkk (2016). Jurusan Teknik Industri Fakultas Sains dan Teknologi UIN Suska. Riau. “Studi Kasus: Kecamatan Tapung Kabupaten Kampar Riauâ€.

Nazarudin, dkk (2017). Mahasiswa Teknik Mesin. Universitas Riau, Riau. : ‘Perancangan Vacuum Evaporator Penurun Kadar Air Dalam Madu Kapasitas 50 Liter’.

Prendis Betha Nanda, dkk. Mahasiswa Fakultas Peternakan. Universitas Brawijaya, Malang. ‘Perbedaan Kadar Air, Glukosa Dan Fruktosa Pada Madu Karet Dan Madu Sonokeling’.

Sepya Ayu Catur Pamungkas, dkk (2016). Mahasiswa Pendidikan Teknik Mesin, Universitas Negeri Semarang, Semarang. “Rancang Bangun Mesin Pengaduk Mentega (churner) dengan Speed Control’,â€.

Sularso dan Kiyokatsu Saga, Elemen Mesin, Technical Colage Japan : AKA, 2017.

Published
2019-06-13
How to Cite
[1]
A. K. Samlawi and W. S. Pamungkas, “PERANCANGAN PROTOTYPE ALAT PENGURANG KADAR AIR PADA MADU KAPASITAS 5 LITER”, SJMEkinematika, vol. 4, no. 1, pp. 47-56, Jun. 2019.